Table of Contents
Advertisement
6. ASSEMBLY/DISMANTLING STONE AND OPTIONS
Note
Only work on the unit when the mains plug has been disconnected
and the stove has cooled down completely�
Note
During assembly / dismantling do not allow objects (screws etc�) to
fall into the pellet container – they can block the screw conveyor
and damage the stove�
Note
During any conversion work, take particular care of your fingers
and any panels and stove attachments� Select soft bases to
prevent scratches to your living space furniture and stove panels�
Tip
Right / Left according to standing in front of the stove!
Dismantling stone
Open the pellet container lid�
Remove the self-locking hexagon nut including the covering plate
which serves to seal the pellet container�
Now tilt the stone slightly and carefully lift diagonally up�
Dismantling rear panels
Remove the handle of the flue gas flap�
Loosen the 2 screws on the rear panel� The rear panel tilts backwards,
lift it off�
# 8
#5
#3
#25
Advertisement
Table of Contents
