Assembly/ Disassembly Stone And Options; Retrofitting To Flue Pipe Connection Rear - RIKA RIKATRONIC3 IMPOSA Operating Manual

8. ASSEMBLY/ DISASSEMBLY STONE AND OPTIONS

Note
Only perform manipulation of the unit when the mains plug of the
stove has been disconnected (RIKATRONIC3) and the stove has
cooled down completely�
Note
Take special care of your fingers and all stove panels and stove
attachments during any conversion work� Select soft bases to
prevent scratches to your living space furniture and stove panels�

Retrofitting to flue pipe connection rear

Remove the top stone plate� Check the securing device of the side
sections to prevent tipping�
Remove the inspection cover from the rear panel�
Lift the smoke tube outlet and the cover plate�
Before you replace the cover plate with the flue outlet, put the lid
insert on the cover plate and screw them together onto the body�
Through the slots of the lid insert clamp the lid insert can be adjusted
to the top edge of the rear wall�
Assembly the stone sections again in reverse order�
#10
#10