RIKA TOPOII Operating Manual page 21

Note
Please contact your warranty partner for any warranty questions or claims. This is your dealer or installation company. No warranty claims can be accepted
without proper putting into operation, proper operation according to the operating instructions and the supplements in this information sheet.
Protocol for putting into operation for RIKA pellet and combi stoves
Installation address
Name:_________________________________________
Street:_________________________________________
City:___________________________________________
Telephone:______________________________________
Stove data
Stove type:
Serial number:
Software version:
Touchdisplay version:
Electrical periphery
Connection socket earthed
Room thermostat present
Check of system components
Combustion chamber door seal checked
Ease of movement flue gas flap checked (combi)
Exhaust line / chimney
Diameter
Bends
Stove functions
Pellet container filled
Tested pellet quality according to Önorm/DIN plus/
ENplus-A1
Electrical connections made
Safety flaps tightened (combi)
Induced draught blower runs
Stove was switched off when handed over
Operator instruction
Stove function
Control
Operating instructions
_______________________
Technican:
Company:_______________________________________
_____________________
Operator
Date:____________________
Dealer
Name:_________________________________________
Street:_________________________________________
City:___________________________________________
Telephone:______________________________________
Casing undamaged
Operating instructions
Warranty documents
Door opener
GSM modem present
Function checked
Ease of movement burnback flap checked (combi)
Connection leakproof
Chimney draught
Grid turns (360°) und keeps in heating position
Ignition element glows
Screw motors run
Do pellets fall into the combustion chamber?
Ignition performed
Warranty terms
Cleaning
Cleaning or maintenance interval
_______________________
Client
work performed correctly according to order placed
|21
20