Cisco CRS Configuration Manual page 227

Implementing MPLS Layer 3 VPNs
SUMMARY STEPS
1. configure
2. router ospf process-name
3. vrf vrf-name
4. router-id {router-id | type interface-path-id}
5. Do one of the following:
6. area area-id
7. interface type interface-path-id
8. Use the commit or end command.
DETAILED STEPS
Step 1 configure
Example:
RP/0/RP0/CPU0:router# configure
Enters Global Configuration mode.
Step 2
router ospf process-name
Example:
RP/0/RP0/CPU0:router(config)# router ospf 109
Enters OSPF configuration mode allowing you to configure the OSPF routing process.
Step 3 vrf vrf-name
• redistribute bgp process-id [metric metric-value] [metric-type {1 | 2}] [route-policy policy-name
] [ tag tag-value]
• redistribute connected [metric metric-value] [metric-type {1 | 2}] [route-policy policy-name]
[tag tag-value]
• redistribute ospf process-id [match {external [1 | 2] | internal | nssa-external [1 | 2]}] [metric
metric-value] [metric-type {1 | 2}] [route-policy policy-name] [tag tag-value]
• redistribute static [metric metric-value] [metric-type {1 | 2}] [route-policy policy-name] [tag
tag-value]
• redistribute eigrp process-id [match {external [1 | 2] | internal | nssa-external [1 | 2]]} [metric
metric-value] [metric-type {1 | 2}] [route-policy policy-name] [tag tag-value]
• redistribute rip [metric metric-value] [metric-type {1 | 2}] [route-policy policy-name] [tag
tag-value]
Cisco IOS XR Virtual Private Network Configuration Guide for the Cisco CRS Router, Release 6.1.x
Connecting MPLS VPN Customers
213