Implementing Point To Point Layer 2 Services - Cisco CRS Configuration Manual

Implementing Point to Point Layer 2 services

This module provides the conceptual and configuration information for Point to Point Layer 2 services on
Cisco IOS XR software.
Note The Point to Point Layer 2 services are also called as MPLS Layer 2 VPNs.
To locate documentation for other commands that might appear while executing a configuration task,
Note
search online in the Cisco IOS XR software master command index.
Feature History for Implementing Point to Point Layer 2 services Configuration Module
Release
Release 3.4.0
Release 3.4.1
Release 3.5.0
Release 3.6.0
Cisco IOS XR Virtual Private Network Configuration Guide for the Cisco CRS Router, Release 6.1.x
3
C H A P T E R
Modification
This feature was introduced.
Support was added for:
• Virtual Circuit Connection Verification
(VCCV) on L2VPN
• Layer 2 VPN (L2VPN) Quality of Service
(QoS) for Ethernet-over-MPLS (EoMPLS)
Support was added for:
• EoMPLS Inter-AS mode
• Mac-in-Mac protocol
Support was added for:
• Ethernet Remote Port Shutdown
• Preferred Tunnel Path
5