Maintenance
5.3
Troubleshooting
The Millennium Transmitter and APM Sensor are not designed to be repaired in the field. If
a problem should develop carefully check for faulty wiring. If it is determined that the
problem is caused by an electronic defect, the device must be returned to the factory for
repair (refer to
Regular checks should be done on the unit around every two to three months to ensure
desired operation. Refer to
5.4
Storage
The sensor and its electronic components/parts should be stored in locations free from
dust and moisture. The storage temperature should be well within the limits of the
certified temperatures of the equipment. See
36
Section 1.2
and
Section 1.3
Section 5.1
for instructions.
for instructions).
Section 8.2.1
for storage temperatures.