Related Manuals for Emerson NNT-TG05
Summary of Contents for Emerson NNT-TG05
- Page 1 Confidential User manual Model Name: NNT-TG05 Emerson Digital Cold Chain, Inc. Revision History Revision Date Description 1.00 2022/09/14 Initial Release...
-
Page 2: Technical Specification
PRODUCT OVERVIEW AND IMPACT SUMMARY: NNT-TG05 is a PCBA that provides features such as location, temperature, vibration, and optic sensing. Aforementioned features are sampled at pre-designated configurable intervals, and then transmitted in real time to the customer user interface for observation by our end users. In the event that coverage is unavailable, this device stores information in logging memory which is subsequently transmitted when coverage is reacquired. -
Page 3: Operational Instruction
UART OPERATIONAL INSTRUCTION: Initialization: NNT-TG05 is initialized by pulling the tab from the main power switch. Upon initialization, a Blue LED serves as a “network status indicator”. A brief description of blue LED indicator is bulleted below. Constant Blue LED illumination: unit is attempting to acquire network. - Page 4 NNT-TG05 contains peripherals that are used to provide invaluable information to the end user. Optic sensing, temperature, humidity, G force detection and location services are all provided to the end user by a customer User Interface. The optic sensor provides information regarding changes in illuminance, and also serves as a mean of security if utilized in a standard environment that is devoid of light.
- Page 5 The full text of the EU declaration of conformity is available at the following internet address: https://europa.eu/youreurope/business/product-requirements/compliance/technical-documentation- conformity/index_en.htm NNT-TG05 complies with the essential requirements of Article 3 of the RED 2014/53/EU Directive, if used for its intended use and that the following standards have been applied: 1. Health (Article 3.1(a) of the RE Directive) Applied Standard(s): ...
- Page 6 mobile device. And the following conditions must be met: 1. This Modular Approval is limited to OEM installation for mobile and fixed applications only. The antenna installation and operating configurations of this transmitter, including any applicable source-based time- averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of 2.1091.
-
Page 7: Radiation Exposure Statement
expected to have the capability to access information in that form. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 8: Important Note
This device is intended only for OEM integrators under the following conditions: (For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. -
Page 9: Plaque Signalétique Du Produit Final
Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et avertissements comme indiqué dans ce manuel. CONTACT: Contact Person: Mona Delavari Job Title: Certification Manager E-mail: mona.delavari@emerson.com Address: 7121 Fairway Dr. #400, Palm Beach Gardens, FL 33418, USA...