Select Display Language - Emerson Net Safety Millennium Reference Manual

4.3.5

Select display language

This section outlines how to change the main display language to English, Spanish, or
French. Follow the steps below to change the display language.
1.
2.
3.
4.
5.
6.
Press and hold the Setup button or the magnet to the Reed switch to enter the main
menu; wait for the countdown, from 10 to 0, to end.
Release the Setup button or remove the magnet from the Reed switch.
The current output will move to 3.0 mA.
When Select Display Language and then YES? is displayed, press the Setup
button or use the Reed switch to select. A flashing YES will confirm your selection.
The message English and then YES? will be displayed.
Press the Setup button or use the Reed switch to select this option. The flashing YES
will confirm this selection. If English is not the desired language, wait five (5)
seconds for the next selection.
The message Espanol and then YES? will be displayed.
Press the Setup button or use the Reed switch to select this option. The flashing YES
will confirm this selection. If Spanish is not the desired language, wait five (5)
seconds for the next selection.
The message Francais and then YES? will be displayed.
Press the Setup button or use the Reed switch to select this option. The flashing YES
will confirm this selection. If French is not the desired language, wait five (5) seconds
for the next selection.
Programming
33