Assembly; Base - Lynxmotion AL5D-PLTW Manual

Note that there is also an online assembly guide from Lynxmotion for the AL5D (which uses
photos), as well as a YouTube video, however this manual is an updated version, so we suggest
using ONLY this guide for the assembly steps.
A. Base
Step A1 : Insert the 1/16" x ⅜" stainless steel pins into the 6mm black plastic beads as shown
(5x)
● 5x steel pins
● 5x plastic beads
Step A2 : Install the bearings into the base as shown. They will fit snugly. Note, the notch in the
bottom edge of the base (shown below) indicates the back.
● 5x plastic bead assemblies
● 1x base rotate (bottom)
RobotShop Inc. 305-18005 Lapointe, Mirabel, Quebec, Canada, J7J0G2
7

Assembly