Lynxmotion AL5D-PLTW Manual page 61

Step E7 : Install FlowArm PLTW from the included CD. The license number should be included
on the printed invoice. If you have any issues with locating the license, please contact
supportcenter@robotshop.com
When you start the program, depending on the settings, the arm may or may not snap into
position. Should the arm move to a position which is different than the image below, and it
seems the servos want to move the arm to a position which is physically blocked, cut power
Step E8 : Choose the COM port associated with the SSC-32U from the drop-down. The COM
port will only be available when the arm is turned ON. The Bluetooth icon simply changes the
baud rate to 9600. Press the Bluetooth icon. The arm should snap into place as shown on the
screen. The angles may be slightly off.
RobotShop Inc. 305-18005 Lapointe, Mirabel, Quebec, Canada, J7J0G2
60