Lynxmotion AL5D-PLTW Manual page 30

Step B6 : Attach the tubing connector hub to the short side of the "L" bracket using two 2-56 x
.250 screws and 2-56 nuts. Orientation of the screws, tubing connector and bracket are
important ; the hole in the tubing connector should be as shown, so the tube lines up as in figure
7. The shorter size of the L-bracket is used. Create two sub-assemblies.
RobotShop Inc. 305-18005 Lapointe, Mirabel, Quebec, Canada, J7J0G2
29