Erroneous Display; An Audio File Cannot Be Played - Sony STR-ZA810ES Manual

Check the shape of the USB device's plug. If the shape does not fit the receiver's port, you
will not be able to connect the USB device to the receiver.
[265] Troubleshooting

Erroneous display.

The data stored in the USB device may have been corrupted.
The character codes that can be displayed by this receiver are as follows:
Upper case letters (A to Z)
Lower case letters (a to z)
Numbers (0 to 9)
Symbols (' = < > * + , – . / @ [ \ ] _ `)
Other characters may not be displayed correctly.
[266] Troubleshooting

An audio file cannot be played.

MP3 files in MP3 PRO format cannot be played.
The audio file is a multiple track audio file.
Some AAC files may not be played correctly.
If you use a partitioned USB device, only audio files on the first partition can be played.
Playback is possible up to 9 levels (including the root folder).
There are more than 500 folders (including the root folder).
There are more than 500 files.
Files that are encrypted, protected by passwords, etc. cannot be played.
[267] Troubleshooting
Cannot connect to the network using WPS via a
wireless LAN connection.
You cannot connect to a network using [Wi-Fi Protected Setup (WPS)] if your access point
is set to WEP. Set up your network after searching the access point using the access point
scan.
[268] Troubleshooting
Cannot connect to the network.
USB devices
USB devices
Network connection
Network connection