Sony STR-ZA810ES Manual page 170

Select [Setup] - [Network Settings] from the home menu.
1
Select [Internet Settings].
2
Select [Wired Setup].
3
The screen for selecting the IP address acquisition method appears on the TV screen.
Select [Auto].
4
The confirmation screen appears.
Press / to browse information, and then press
5
Select [Save & Connect].
6
The receiver starts connecting to the network. For details, refer to the messages that
appear on the TV screen.
If using a fixed IP address
Select [Manual] in step 4 and follow the on-screen instructions.
Hint
See [Network Connection Status] when checking the network settings.
[194] Adjusting Settings
Setting up a wireless LAN connection
Before performing network settings
When your wireless LAN router (access point) is Wi-Fi Protected Setup (WPS)-compatible, you
can easily set the network settings with the WPS button.
If not, you will be required to select or enter the following information. Check the following
information in advance.
The network name (SSID) (*1) of the wireless LAN router/access point
The security key (passkey) (*2) for the network
*1 SSID (Service Set Identifier) is a name that identifies a particular access point.
This information should be available from a label on your wireless LAN router/access point, from the operating
*2
instructions, from the person who set up your wireless network, or from the information provided by your Internet
service provider.
Select [Setup] - [Network Settings] from the home menu.
1
Network Settings
.