No Sound Is Output From The Tv When The Receiver Is In Standby Mode - Sony STR-ZA810ES Manual

[252] Troubleshooting
No sound is output from the TV when the receiver is in
standby mode.
When the receiver enters standby mode, sound is output from the last HDMI device selected
before you turned off the receiver. If you are enjoying content from another device, play the
content on the device and perform the One-Touch Play operation, or turn on the receiver to
select the HDMI device from which you want to enjoy content.
Make sure [Standby Through] is set to [On] or [Auto] in the [HDMI Settings] menu.
[253] Troubleshooting
No TV sound is output from the receiver.
Check the type and connection of the HDMI cable, optical digital cable, or audio cable that is
connected to the receiver and the TV (refer to the supplied Startup Guide).
When the receiver is connected to a TV compatible with the Audio Return Channel (ARC)
function, make sure the receiver is connected to an HDMI jack compatible with the Audio
Return Channel (ARC) function (refer to the supplied Startup Guide). If sound is still not
output or if sound is interrupted, connect the optical digital cable (not supplied) and set on
the receiver [Setup] - [HDMI Settings] - [Control for HDMI] to [Off].
If the TV is not compatible with the Audio Return Channel (ARC) function, connect the
receiver to the TV using an optical digital cable (not supplied) or audio cable (not supplied).
There will be no TV sound from the connected speakers when the receiver is connected to
an HDMI input jack of a TV that is not compatible with the Audio Return Channel (ARC)
function.
Switch input of the receiver to [TV].
Increase the volume on the receiver or cancel muting.
If the sound of a cable box or satellite box connected to the TV is not output, connect the
device to an HDMI input jack of the receiver and switch the input of the receiver to the input
for the connected device (refer to the supplied Startup Guide).
Depending on the order in which you connect the TV and the receiver, the receiver may be
muted and [Muting] is displayed on the display panel of the receiver. If this happens, turn on
the TV first, then the receiver.
Set the speaker setting of the TV (BRAVIA) to "Audio System." Refer to the operating
instructions of your TV regarding how to set the TV.
[254] Troubleshooting
Image and sound are not output from the TV when the
receiver is not turned on.
Set [Setup] - [HDMI Settings] - [Control for HDMI] to [On], and then set [Standby Through] to
[Auto] or [On].
Turn on the receiver, then select the input to which the playing device is connected.
If connected to devices other than those manufactured by Sony that support the Control for
HDMI function, set [Setup] - [HDMI Settings] - [Control for HDMI] to [On].
Make sure the HDMI OUT is set to [HDMI A] or [HDMI A+B].
Sound
Sound
Sound