Sony STR-ZA810ES Manual page 67

Select [STR-ZA810ES XXXXXX] (*) on the BLUETOOTH device display.
4
If [STR-ZA810ES XXXXXX] (*) is not displayed, repeat this process from step 1.
When the BLUETOOTH connection is established, the paired device name appears and
[BT] lights up on the display panel.
Start playback on the BLUETOOTH device.
5
Adjust the volume.
6
Adjust the volume of the BLUETOOTH device first. If the volume level is still too low, adjust
the volume level of the receiver.
XXXXXX is the identification number for each unit.
*
Canceling pairing operation
Pairing operation will be canceled when you switch the input.
Note
Some applications of BLUETOOTH device cannot be controlled from the receiver.
If a passkey is required on the display of the BLUETOOTH device in step 4, enter [0000]. The
passkey may be called "Passcode," "PIN code," "PIN number" or "Password."
You can pair up to 9 BLUETOOTH devices. If a 10th BLUETOOTH device is paired, the least
recently connected device will be replaced by the new one.
CONNECTION PAIRING BLUETOOTH on the receiver does not work when the [Bluetooth Mode]
is set to [Off].
Hint
You can change the name of the receiver that appears on your device in [Device Name] in the
[System Settings] menu.
[60] Enjoying Video and Sound
Compatible iPhone/iPad/iPod models
You can use the following iPhone/iPad/iPod models on this receiver. Update your
iPhone/iPad/iPod with the latest software before using it.
BLUETOOTH technology works with
iPhone:
iPhone 7 Plus/iPhone 7/iPhone SE/iPhone 6s Plus/iPhone 6s/iPhone 6 Plus/iPhone
6/iPhone 5s/iPhone 5c/iPhone 5/iPhone 4s
iPod touch:
iPod touch (5th and 6th generation)
Playing content from an iPhone/iPad/iPod