Sony STR-ZA810ES Manual page 124

[124] Using the Multi-Zone Features
or another receiver
Setting the priority for the main zone (Priority)
If you select the same HDMI input for the main zone and HDMI zone when the HDMI zone
function is enabled, there may be some interference to the audio and video signals in the main
zone. To avoid possible interference, you can place priority on the main zone for HDMI input
selection.
Select [Setup] - [HDMI Settings] from the home menu.
1
Select [Priority].
2
Select the setting you want.
3
Main & Zone:
You can enjoy the same input in the main zone and HDMI zone. However, there may
be some interference between the audio and video signals in the main zone and those
in the HDMI zone.
Main Only:
You can enjoy audio and video without interference in the main zone. However, if the
same input is selected in HDMI zone, there will be no video or audio output from HDMI
zone.
Note
This function works only when [HDMI Out B Mode] is set to [Zone].
Hint
If you connect TVs that have different resolutions to the main zone and HDMI zone but select the
same HDMI input for both zones, the lower of the two resolutions is used for the video signals output
to both TVs.
[125] Using the Multi-Zone Features
or another receiver
Enjoying video and sound in another location by
connecting another amplifier or TV using HDMI
connections (HDMI zone)
You can enjoy sound from the another amplifier in the HDMI zone by the following procedure.
Select [Zone Controls] - [HDMI Zone Power] - [On] from the home menu.
1
The HDMI zone is activated.
Enjoying video and sound in another room using a TV
Enjoying video and sound in another room using a TV