Surround Speaker Position - Sony STR-ZA810ES Manual

When [Zone2 Power] is set to [Off], the SPEAKERS SURROUND BACK/HEIGHT terminals are
enabled even if [ZONE2 Terminals] is selected.
When [ZONE2 Terminals] is selected and [Zone2 Power] is set to [On], [Zone2 Power] will be set to
[Off] automatically if the [Speaker Pattern] is set to [5.0] or higher.
[165] Adjusting Settings
Lifting up the sound of the center speaker (Center
Speaker Lift Up)
By using the front high speakers, you can lift up the sounds of the center speaker to an
appropriate height on the screen, allowing you to enjoy natural sound without discomfort.
Select [Setup] - [Speaker Settings] from the home menu.
1
Select [Center Speaker Lift Up].
2
Select the setting you want.
3
1 - 10
Off
Note
This function does not work in the following cases:
Headphones are connected.
There is no center speaker.
[Height/Overhead Speakers] is set to other than [FH] (front high speakers) in the [Speaker Pattern]
setting.
[2ch Stereo] or [Multi Ch Stereo] is being used.
A sound field for music is being used.
[Bluetooth Mode] is set to [Transmitter].
[In-Ceiling Speaker Mode] is set to [Front & Center] or [Front].
[DSD Native] is set to [On] and DSD signals are being played back.
[166] Adjusting Settings
Setting the correct angles of the surround speakers

(Surround Speaker Position)

You can select the appropriate position of the surround speakers to operate the Speaker
Relocation/Phantom Surround Back function properly.
Select [Setup] - [Speaker Settings] from the home menu.
1
Speaker Settings
Speaker Settings