Sony STR-ZA810ES Manual page 176

[205] Adjusting Settings
Checking the BLUETOOTH device list (Device List)
You can check a list of the paired and detected BLUETOOTH receivers such as headphones
when [Bluetooth Mode] is set to [Transmitter]. You can perform pairing with detected devices
from the list.
Select [Setup] - [Bluetooth Settings] from the home menu.
1
Select [Device List].
2
Hint
Select [Scan] to refresh the list.
[206] Adjusting Settings
Setting the BLUETOOTH Standby mode (Bluetooth
Standby)
You can set the BLUETOOTH Standby mode so that this receiver can be controlled by a
BLUETOOTH device even when this receiver is in standby mode.
Select [Setup] - [Bluetooth Settings] from the home menu.
1
Select [Bluetooth Standby].
2
Select the setting you want.
3
On: You can turn on this receiver from a paired BLUETOOTH device.
Off: This receiver cannot be turned on from a paired BLUETOOTH device.
Note
When this receiver is in standby mode, the power indicator on the front panel lights up in amber if the
following conditions are met:
[Bluetooth Standby] is set to [On].
A BLUETOOTH device which already exists in the pairing registration information is paired again.
This function works only when [Bluetooth Mode] is set to [Receiver] or [Transmitter].
If you set [Bluetooth Standby] to [On], this receiver turns on when you establish a BLUETOOTH
Bluetooth Settings
Bluetooth Settings