Sony STR-ZA810ES Manual page 172

[196] Adjusting Settings
Checking whether the network connection has been
made properly (Network Connection Diagnostics)
You can run the network diagnostic to check whether the network connection has been made
properly.
Select [Setup] - [Network Settings] from the home menu.
1
Select [Network Connection Diagnostics].
2
Follow the on-screen instructions.
3
[197] Adjusting Settings
Displaying the connected home network server
(Connection Server Settings)
You can change the display settings of the connected server, check the connection or remove
the server from the list.
Select [Setup] - [Network Settings] from the home menu.
1
Select [Connection Server Settings].
2
[198] Adjusting Settings
Enabling automatic access from a newly detected
controller device (Auto Home Network Access
Permission)
You can set whether or not the receiver allows automatic access from a newly detected
controller device on the home network.
Select [Setup] - [Network Settings] from the home menu.
1
Select [Auto Home Network Access Permission].
2
Network Settings
Network Settings
Network Settings