Sony STR-ZA810ES Manual page 64

Press +/– to adjust the volume.
6
You can also use MASTER VOLUME on the receiver.
Press 2CH/MULTI, MOVIE, MUSIC or FRONT SURROUND to enjoy the surround
7
sound.
You can also use 2CH/MULTI, MOVIE or MUSIC on the receiver.
Note
Before you turn off the receiver, be sure to turn down the volume level to avoid damaging your
speakers the next time you turn on the receiver.
Hint
You can turn INPUT SELECTOR on the receiver or press the input buttons on the remote control to
select the device you want.
You can adjust the volume differently using the MASTER VOLUME knob on the receiver or the
+/– buttons on the remote control.
To turn the volume up or down quickly, perform the following:
Turn the knob quickly.
Press and hold one of the buttons.
To make fine adjustments, perform the following:
Turn the knob slowly.
Press one of the buttons and release it immediately.
[56] Enjoying Video and Sound
Enjoying sound of a TV compatible with the Audio
Return Channel (ARC) function
If the receiver is connected to a TV's HDMI input jack compatible with the Audio Return Channel
(ARC) function, you can listen to TV sound from the speakers connected to the receiver without
connecting an optical digital cable or an audio cable.
Set the receiver by the following procedure to output the sound of the TV from the speakers
connected to the receiver.
Select [Setup] - [HDMI Settings] from the home menu.
1
Select [Control for HDMI].
2
Select [On].
3
If you connect to a TV that is not compatible with the Audio Return Channel
(ARC) function or you want to select an audio signal using a cable other than
Playing AV devices