Connecting Devices With Hdmi - Sony STR-ZA810ES Manual

see "Switching the TVs that output the HDMI video signals."
Refer to the operating instructions of each connected device for details.
[32] Preparation 4. Connecting audio-visual devices and the antennas (aerials)
Connecting devices with HDMI jacks
Connect devices to the receiver as illustrated below. Before connecting cables, be sure to
disconnect the AC power cord (mains lead).
All HDMI jacks on the receiver support High-bandwidth Digital Content Protection System
Revision 2.2 (HDCP 2.2). To watch content protected by HDCP 2.2, such as 4K content,
connect these HDMI jacks to jacks that support HDCP 2.2 on the AV device. Refer to the
operating instructions of the connected device for details.
HDMI cable (not supplied)
DVD recorder/player
Super Audio CD player, CD player
Blu-ray Disc™ recorder/player
Game console such as PlayStation 4
Cable box or satellite box
Note
Sony recommends that you use an HDMI cable made by Sony or another HDMI-authorized cable.
Be sure to use a High Speed HDMI Cable with Ethernet. Premium High Speed HDMI Cable with
Ethernet that supports 18 Gbps is required for 4K/60p 4:4:4, 4:2:2, and 4K/60p 4:2:0 10 bit, etc.
Hint