Sony STR-ZA810ES Manual page 180

field (Auto Display)
This function allows you to turn the information display which appears on the TV screen on or
off when the volume level or sound field, etc. of the receiver is changed.
Select [Setup] - [System Settings] from the home menu.
1
Select [Auto Display].
2
Select [On] or [Off].
3
[213] Adjusting Settings
Setting standby mode (Auto Standby)
You can set the receiver to switch to standby mode automatically when you do not operate the
receiver or when no signals are input to the receiver.
Select [Setup] - [System Settings] from the home menu.
1
Select [Auto Standby].
2
Select [On] or [Off].
3
When you select [On], the receiver switches to standby mode automatically in about 20
minutes if there is no operation.
Note
This function does not work in the following cases:
[FM TUNER] is selected as the input.
The software of the receiver is being updated.
BLUETOOTH receiver (headphones/speakers) are connected.
If you use the Auto Standby mode and the sleep timer at the same time, the sleep timer has priority.
[214] Adjusting Settings
Switching the brightness of the display panel
(Dimmer)
System Settings
System Settings