Sony STR-ZA810ES Manual page 66

Start playing back audio content on an iPhone/iPad/iPod or in iTunes.
3
XXXXXX is the identification number for each unit.
*
Controlling AirPlay playback
You can use the +/–,
selected as the device for output.
Note
Update the iPhone/iPad/iPod or iTunes to the latest version before using with the receiver.
Refer to the operating instructions of your device for details on operating the iPhone/iPad/iPod,
iTunes or AirPlay.
Hint
If the playback does not start, perform the process again from step 1.
Very loud sound may output from the receiver if you set the volume loud on an iPhone/iPad/iPod or
iTunes.
It may not be possible to link the volume level of an iPhone/iPad/iPod or iTunes with the volume level
of this receiver.
[59] Enjoying Video and Sound
Enjoying audio content using the BLUETOOTH
function (Pairing operation)
Pairing is an operation where BLUETOOTH devices are registered to each other before
connection. Once a pairing operation is performed, it does not need to be performed again. Be
sure to set the [Bluetooth Mode] to [Receiver] before pairing a device with this receiver.
Place the BLUETOOTH device within 1 meter (3.3 feet) of the receiver.
1
Press and hold CONNECTION
2
the BLUETOOTH function.
[PAIRING] flashes on the display panel. Perform step 3 within five minutes, otherwise
pairing will be canceled. If pairing is canceled, repeat this step.
Perform pairing on the BLUETOOTH device to detect this receiver.
3
For details, refer to the operating instructions of your BLUETOOTH device.
A list of detected devices may appear on the BLUETOOTH device display depending on
the type of BLUETOOTH device. This receiver is displayed as [STR-ZA810ES XXXXXX]
(*).
, , , buttons on the remote control when the receiver is
Playing content from an iPhone/iPad/iPod
PAIRING BLUETOOTH on the receiver to select