Sony STR-ZA810ES Manual page 167

same HDMI input for both zones, the lower of the two resolutions is used for the video signals output
to both TVs.
[189] Adjusting Settings
Setting HDMI signal formats (HDMI Signal Format)
You can select the signal format so that the receiver can receive high resolution 4K signals.
Select [Setup] - [HDMI Settings] from the home menu.
1
Select [HDMI Signal Format].
2
Select the HDMI input you want to apply the setting.
3
Select the setting you want.
4
Standard format: Select this when you do not use high bandwidth video format.
Enhanced format: Select this when you use high bandwidth video formats such as
4K/60p 4:4:4, 4:2:2 and 4K/60p 4:2:0 10 bit.
Note
When [Enhanced format] is selected, we recommend using a Premium High Speed HDMI Cable with
Ethernet that supports 18 Gbps.
When [Enhanced format] is selected, some devices (cable box or satellite box, Blu-ray Disc player,
and DVD player) may not work. In this case, select [Standard format].
If your TV has similar menu for high bandwidth video format, check the setting on the TV menu when
you select [Enhanced format] on this receiver. For details on the setting of the TV menu, refer to the
operating instructions of the TV.
For details about the high bandwidth video format, refer to "Supported video formats" in "About HDMI
connections."
[190] Adjusting Settings
Setting the color space conversion for the video signal
from HDMI jacks (YCbCr/RGB (HDMI))
Select [Setup] - [HDMI Settings] from the home menu.
1
Select [YCbCr/RGB (HDMI)].
2
HDMI Settings
HDMI Settings