Table of Contents
Advertisement
=i(-Toadarer-1m sells svanciale@veiceiicieceriihy
and Sequentially — MACRO PLAY SET
(Continued from previous page.)
4 Click on MACRO1 or MACRO2.
The selected macro lights up.
PLAY SET:
(Ula
Mm
of
iF)
a
"
5 Click on button "1".
The number indicates the sequence in which the
command code will be executed.
6 Click on BACK or NEXT to display the selectable
command codes in the COMMAND buttons.
Clicking on the button causes different command codes
in the CUSTOM IR CODE SET and program sources in
the FUNCTION menu to appear.
To specify a time lag between the end of one program
source and the start of another, click on NEXT until the
required time lag appears among the COMMAND
buttons (i.e., WAIT 5 SEC, WAIT 10 SEC, etc.).
7 Click on a command code from among the
COMMAND buttons.
The name of the selected command code appears on
the numbered button, and the next numbered button
lights up. Repeat this procedure until you enter all the
command codes you want. To erase a command code,
click on the respective numbered button, then on the
NEXT button until NO SET appears among the
COMMAND buttons. The command code is erased
when you click on the NO SET.
To leave the menu, click on EXIT.
To return to the previous menu, click on RETURN.
To enter command codes randomly, click on the
numbered button, then on the command code.
You can activate the MACRO function by clicking on
MACRO1 or MACRO2 in the FUNCTION menu.
BTTJe) Fh" Ore) (0) 4
— DISPLAY MODE
Use the DISPLAY MODE menu to select from three types of
pointers and four display colors.
1 Click on FUNCTION in the main menu.
The FUNCTION menu appears.
2 Ctick on SET UP.
The SET UP menu appears.
To return to the main menu, click on EXIT.
3 Click on DISPLAY MODE.
The DISPLAY MODE menu appears.
Advertisement
Table of Contents
