Pqrlm Enable/Disable Return Link Message Output - Quectel L70 Command Manual

Reference
Parameter
<mode>
<save>
Example
$PQJAM,W,1,1*3C
$PQJAM,W,OK*14
$PQJAM,R*39
$PQJAM,R,1*24
NOTES
1. The command will be effective immediately after setting.
2. The command is not supported in backup mode.

2.13. PQRLM Enable/Disable Return Link Message Output

PQRLM Enable/Disable Return Link Message Output
Write Command
$PQRLM,W,<mode>,<save>*ChkSum
<CR><LF>
GNSS_SDK_Commands_Manual
Parameter
<status> Jamming status
Example
$PMTKSPF,1*5A
Operation mode
0 Disable jamming detection function
1 Enable jamming detection function
Save operation
0 Parameter is not saved, and ineffective after restart
1 Parameter is saved in flash, and effective after restart
//Enable jamming detection function
//Set OK
//Read operation mode
//Read OK
Response
$PQRLM,W,OK*ChkSum<CR><LF>
If there is any error, response:
$PQRLM,W,ERROR*ChkSum<CR><LF>
GNSS SDK Commands Manual
1 No jamming, healthy status.
2 Warning status.
3 Critical status
Confidential / Released
GNSS Module Series
18 / 28