Parameter
<beidounmeatype>
<errcode>
2.1.7. AT+QGPSCFG="gsvextnmeatype" Enable/Disable Output of GSVEXT NMEA
Sentences
AT+QGPSCFG="gsvextnmeatype" Enable/Disable Output of GSVEXT NMEA
Sentences
Write Command
AT+QGPSCFG="gsvextnmeatype"[,<
gsvextnmeatype>]
Reference
Parameter
<gsvextnmeatype>
<errcode>
EP06&EG06&EM06_GNSS_AT_Commands_Manual
Configure output type of BeiDou NMEA sentences via ORed, and the
configuration parameter will be automatically saved to NVRAM. The default
value is 0.
0
Disable
1
GSA
2
GSV
Integer type. The error code of the operation. If it is not 0, it is the type of error.
Please refer to Chapter 4 for details.
Response
When there are two parameters:
OK
When the second parameter is omitted, query the current
setting:
+QGPSCFG: "gsvextnmeatype",<gsvextnmeatype>
OK
If there is any error related to ME functionality:
+CME ERROR: <errcode>
Enable/disable output of extended GSV information. Elevation/Azimuth/SNR
(C/No) will be displayed as decimals when extended information is enabled,
otherwise they will be displayed as integers. The configuration parameter will
be automatically saved to NVRAM. The default value is 0.
0
Disable
1
Enable
Integer type. The error code of the operation. If it is not 0, it is the type of error.
Please refer to Chapter 4 for details.
EP06&EG06&EM06 GNSS AT Commands Manual
LTE Module Series
13 / 29