Pqjam Enable/Disable Jamming Detection Function - Quectel L70 Command Manual

Reference
Parameter
<mode>
<save>
Example
$PQVEL,W,1,1*25
$PQVEL,W,OK*0D
$PQVEL,R*20
$PQVEL,R,1*3D
NOTE
The command will be effective immediately after setting.

2.12. PQJAM Enable/Disable Jamming Detection Function

PQJAM Enable/Disable Jamming Detection Function
Write Command
$PQJAM,W,<mode>,<save>*ChkSum
<CR><LF>
Read Command
$PQJAM,R*ChkSum<CR><LF>
URC Message
GNSS_SDK_Commands_Manual
<down_vel>
Example
$PQVEL,1.000000,2.000000,-0.000000*42
Enable/disable 3 ways velocity sentence output
0 Disable
1 Enable
Save operation
0 Parameter is not saved, and ineffective after restart
1 Parameter is saved in flash, and effective after restart
//Enable 3 ways velocity sentence output
//Set OK
//Read mode
//Read OK, 3 ways velocity sentence output is enabled
Response
$PQJAM,W,OK*ChkSum<CR><LF>
If there is any error, response:
$PQJAM,W,ERROR*ChkSum<CR><LF>
Response
$PQJAM,R,<mode>*ChkSum<CR><LF>
$PMTKSPF, <status>*ChkSum<CR><LF>
GNSS SDK Commands Manual
Down velocity
Confidential / Released
GNSS Module Series
17 / 28