Materials - NTI ST-C5KVMA-600 Installation And Operation Manual

NTI XTENDEX 600 Foot Extenders

MATERIALS

Materials supplied with ST-C5xxxx-600:

NTI XTENDEX Local Unit

NTI XTENDEX Remote Unit

2- 120VAC or 240VAC at 50 or 60Hz-9VDC/1.0A AC Adapters (only 1 ST-C5KM-600)
Materials supplied with ST-2C5xxxx-L-600:

NTI XTENDEX Local Unit

1- 120VAC or 240VAC at 50 or 60Hz-9VDC/1.0A AC Adapter
Additional materials may need to be ordered, depending upon the configuration:

CAT5/5e/6 unshielded twisted-pair cable(s) terminated with RJ45 connectors wired straight thru- pin 1 to pin 1, etc. (see pg.
8 for proper EIA/TIA 568 B wiring method)
Note: Shielded CAT5, 5e, or 6 cable must be used to connect to LOCAL and REMOTE units in order to meet CE emission
requirements.

Cable(s) needed if Local Unit will be located further than 15" from the CPU
Model
ST-C5KVM-600
ST-C5KVMRS-600
ST-C5KVMA-600
ST-C5V-600
ST-C5VRS-600
ST-C5VA-600
ST-C5KM-600
The chart above also applies to Local Unit models with support for two remotes.
Cables Lengths Available
Cable
VKMEXT-xx
VEXT-xx
DINT-xx
SA-xx-MF
VVKINT-xx
VVKEXT-xx
Legend:
xx= 3, 6, 10, 15 or 25 foot length
MM= cables have male connectors on both ends (except for the DB9) and are only used with Local Units
Note: If two users will be connected (one local and one remote), two of the cables without the "MM"
(i.e. VMCTINT-xx) will be needed.
Contact your nearest NTI distributor or NTI directly for all of your KVM needs at 800-RGB-TECH (800-742-8324) in US & Canada
or 330-562-7070 (Worldwide) or at our website at http://www.networktechinc.com and we will be happy to be of assistance.
Cable(s) needed
VKMEXT-xx (xx= 3/6/10/15/25/35/50/75/100 feet)
VKMEXT-xx and DINT-xx
VKMEXT-xx and SA-xx-MF
VEXT-xx
VEXT-xx and DINT-xx
VEXT-xx and SA-xx-MF
VVKINT-xx or VVKEXT-xx
xx= Length in feet
3/6/10/15/25/35/50/75/100
3/6/10/15/25/35/50/75/100
6/10/15
6/12/25/50
3/6/10/15/25
35/50/75/100
2