Submenu "Set Out": Serial Interface Settings - JUMO 202710/20 Operating Manual

8 Device settings

8.3.2 Submenu "SEt Out": serial interface settings

Overview of the parameters
Parameter "Out": serial interface
40
After calling up the setting menu with
Out", use the key to select the parameter to be configured.
SAL mg/l kOhm mS µS
Lin nLF AL Logg %/K 1/cm
NOTE!
The functions of the serial interface are not supported in this device. The
interface should always be deactivated in order to minimize power consump-
tion.
Use the and
Menu/parameter
Press the key to save the setting and move to the next submenu of the
setting menu or
press the key to save the setting, quit the device settings, and return to
measurement mode.
CAL
3
keys to deactivate the interface:
Setting option Meaning
oFF Interface deactivated.
Minimizes the power consumption of the
device
Ser Interface activated.
Not supported in this device; increases
the power consumption of the
device!
and selecting the submenu "SEt