Quantum StorNext QD7000 Hardware Manual page 52

44 | Hardware Cabling Guide
1. Host Interface Link 3 Up LED
2. Host Interface Link 3 Active LED
3. FC Host Interface Connector 3
4. Host Interface Link 4 Up LED
5. Host Interface Card Link 4 Active LED
For each pair of LEDs associated with a host connector (1 and 2, 4 and 5), the following table shows
what different lighting patterns indicate.
Left (green) on
Right (yellow) on
FC link down
iSCSI 1. (green) speed
2. (yellow) activity
E2700 right, rear subplate with a quad port FC or iSCSI host interface card
1. Host Interface Link 3 Up LED
2. Host Interface Link 3 Active LED
3. FC Host Interface Connector 3
4. Host Interface Link 4 Up LED
5. Host Interface Link 4 Active LED
6. FC Host Interface Connector 4
7. Host Interface Link 5 Up LED
8. Host Interface Link 5 Active LED
For each pair of LEDs associated with a host connector (1 and 2, 4 and 5, 7 and 8, 10 and 11), the
following table shows what different lighting patterns indicate.
6. FC Host Interface Connector 4
7. Expansion Fault LED
8. Expansion Active LED
9. Expansion SFF-8644 Port Connector
Left (green) off Left (green) on
Right (yellow) on Right (yellow) off
link up, 8Gb/s link up, 4Gb/s
1. (green) speed 1. (green) speed
2. (yellow) activity 2. (yellow) activity
9. FC Host Interface Connector 5
10. Host Interface Card Link 6 Up LED
11. Host Interface Card Link 6 Active LED
12. FC Host Interface Card Connector 6
13. Expansion Fault LED
14. Expansion Active LED
15. Expansion SFF-8644 Port Connector
Left (green) off
Right (yellow) off
link up, 16Gb/s
1. (green) speed
2. (yellow) activity