Inspection And Connection Of Ancillary Equipment - Olympus EVIS EXERA II Operation Manual

Chapter 3 Preparation and Inspection
3.5 Inspection and connection of ancillary
equipment
Inspection of ancillary equipment
34
Figure 3.13
• Attach the water container to the specified receptacle on the
trolley (cart) or on the light source. If the water container is
attached anywhere else, water may drip from the water
container's water supply tube, and equipment malfunction
can result.
• Take care not to spill water from the water container's
connection adapter when detaching the connection adapter
from the endoscope. Spilled water could splash on the
equipment, and may cause equipment malfunction.
Prepare and inspect the light source, video system center, monitor, water
container, suction pump, and EndoTherapy accessories as described in their
respective instruction manuals.
The NBI observation mode is available when the video
system center CV-180 and the light source CLV-180 are used
with the endoscope.
EVIS EXERA II TJF TYPE Q180V OPERATION MANUAL
Biopsy valve
Instrument
channel port