Olympus EVIS EXERA II Operation Manual page 25

5.
Place the hole on the fitting part over the endoscope's S-cord connector
mount (see Figure 2.3).
Figure 2.3
6.
Confirm that the fitting part is securely attached to the foot of the S-cord
connector mount and can be smoothly rotated.
EVIS EXERA II TJF TYPE Q180V OPERATION MANUAL
Chapter 2 Instrument Nomenclature and Specifications
Fitting part
Hole
S-cord connector
mount or chain
connector
The instructions on the remaining pages of this manual are
given under the assumption that the chain for water-resistant
cap is detached from the endoscope.
21