Olympus EVIS EXERA II Operation Manual page 24

Chapter 2 Instrument Nomenclature and Specifications
20
Notch
Chain part
Connecting plate
Figure 2.1
To ensure that you do not forget to attach the water-resistant
cap, it is recommended that you connect the chain for
water-resistant cap to the endoscope's S-cord connector
mount.
1.
Confirm that the chain for water-resistant cap is free from cracks, flaws,
wear, deformation, or other damages (see Figure 2.1).
2.
Align the notch on the connecting plate with the pin on the venting connector
of the water-resistant cap (MH-553, see Figure 2.2).
3.
Place the connecting plate over the venting connector (see Figure 2.2).
4.
Confirm that the connecting plate is securely attached to the foot of the
venting connector and can be smoothly rotated (see Figure 2.2).
Connecting plate
Venting connector
Water-resistant cap
Figure 2.2
EVIS EXERA II TJF TYPE Q180V OPERATION MANUAL
Fitting part
Hole
Notch
Pin