Advertisement
Quick Links
Advertisement
Related Manuals for Olympus EMPOWER EMP-H35S
Summary of Contents for Olympus EMPOWER EMP-H35S
- Page 1 OLYMPUS EMPOWER Ho:YAG LASERS ™ QUICK REFERENCE GUIDE EMP-H35S/EMP-H65S/EMP-H100S...
- Page 2 Operators Manual and/or Instructions For Use (IFU) provided with the EMP-H35S, EMP-H65S or EMP-H100S OLYMPUS EMPOWER laser system Olympus cannot encourage or recommend any actions that deviate or are not covered by the IFU. E M P - H3 5 S , E MP - H 6 5S & E MP - H 1 0 0S Q UI C K RE FE RE NCE GU IDE...
-
Page 3: Required Parts
L A S E R S E T - U P Required parts Power Cord OLYMPUS EMPOWER Laser Fiber Unlock Key Foot Switch Interlock Connector H35 Power Cord H65 & H100 Power Cord OLYMPUS EMPOWER Laser Fiber Unlock Key H65 & H100 Dual... - Page 4 The Laser will run a self-check of all system components. If an error occurs during start up, the laser will display an error code. If this occurs, restart the device. If the error still remains, contact Olympus Service. Once the system check is complete, the home screen will load.
- Page 5 L A S E R O P E R A T I O N Connect the laser fiber The fiber is connected to the device through the fiber port on the front panel. The fiber connector has an additional ring which facilitates the clamping of the fiber to the connector on the device.
- Page 6 L A S E R O P E R A T I O N Adjust the aiming beam Select the aiming beam button on the main screen. The pop up displays the aiming beam intensity with an option to adjust, as well as the option to select a solid or blinking aiming beam.
- Page 7 L A S E R O P E R A T I O N Activating the laser To activate the laser, first put the laser in READY mode by pressing the READY button on the screen or the circular button on the foot switch. If using the foot switch button, note that the button must be held down for a few seconds to activate (until beep is heard).
- Page 8 Viewing Fiber information The Laser RFID system recognizes information on the OLYMPUS EMPOWER Laser Fiber and its use history. To display the data, touch the Fiber Info button on the Main screen. The pop up will display fiber size and type, number of uses, and date of last use.
- Page 9 L A S E R O P E R A T I O N Laser Fiber Selection Guide Fiber Size Part Number μm (Core) μm (OD) French (OD) EMP-FBX200HS 1.14 EMP-FBX200HR EMP-FBX200BHS 200 Series 1.26 EMP-FBX200BHS-C EMP-FBX272HS EMP-FBX272HR 420 (jacket)* 1.26 EMP-FBX272HS-C EMP-FBX272HR-C...
- Page 10 OLYMPUS EMPOWER is a registered trademark of Olympus Corporation, Olympus America Inc., and/or their affiliates. ™ Medical devices listed may not be available for sale in all countries. Distributed by For more information, contact your Olympus sales representative, or call 800-848-9024.