Olympus EVIS EXERA II Operation Manual page 40

Chapter 3 Preparation and Inspection
Mark 1 (yellow)
36
7.
Align the mark on the videoscope cable EXERA, EXERA II, or 100 with
mark 1 on the endoscope connector and push it in until it stops (see Figure
3.15).
Mark (yellow)
Figure 3.15
8.
Turn the connector of the videoscope cable towards mark 2 until it stops
(see Figure 3.15).
9.
Confirm that the mark on the videoscope cable is aligned with mark 2 on the
endoscope connector.
10.
Connect the suction tube from the suction pump to the suction connector on
the endoscope connector (see Figure 3.16).
Suction connector
Suction tube
Figure 3.16
EVIS EXERA II TJF TYPE Q180V OPERATION MANUAL
Videoscope cable
Videoscope cable
Mark 2 (yellow)
Suction pump