Omron GX-ID1611 User Manual page 60

4 Installation and Wiring
 Recommended product
The following pin terminals are recommended for the unit power supply cables.
Model
AI0,5-10WH
H0.5/16 orange
Also, the following screwdriver is recommended for removing pin terminals.
Model
XW4Z-00C
IO-Link Master Unit
Supply the Unit power supply and the I/O power supply through the same power supply connector.
(Notes) Supply the Unit power supply and the I/O power supply from separate sources.
An M12 connector (A-coding, male) is used for the power supply connector.
The I/O power supply specifications are given below.
Item
I/O power supply
Power supply connector
 Power Supply Connector
Pin No.
1
2
3
4
4 - 12
Applicable wire
size
0.5 mm/AWG20
0.5 mm/AWG20
Manufacturer
OMRON
20.4 to 26.4 VDC (24 VDC −15%/+10%)
GX-ILM08C
Signal Description
UNT_P+ Unit power supply +
Unit power supply −
UNT_P−
IO_P+ I/O power supply +
I/O power supply −
IO_P−
Crimping tool
CRIMPFOX UD6
(Product No. 1204436) Phoenix Contact
or CRIMPFOX ZA3 Co., Ltd.
series
Crimper PZ1.5
Weidmueller Japan Co., Ltd.
(Product No. 900599)
Specification
GX-series EtherCAT Slave Unit User's Manual
Manufacturer