FX2N-64CL-M CC-Link/LT Master Block
4.
System Configuration
This section explains the CC-Link/LT system configuration.
DESIGN PRECAUTIONS
When a remote I/O unit fails, outputs may randomly turn ON or OFF, therefore, build an
external monitoring circuit that will protect from any input signals that could cause a serious
accident.
DESIGN PRECAUTIONS
• Do not bind control cables and flat cables dedicated to CC-Link/LT together with power
cables.
Keep control cables and flat cables dedicated to CC-Link/LT away from major circuits and
power cables by 100 mm (3.93") or more.
It may cause a malfunction due to noise interference.
• Use the FX
connectors for
CC-Link/LT interface and flat cables dedicated to CC-Link/LT.
If any force is applied, wire breakage and failure may occur.
-64CL-M in anenvironment status that any force is not directly applied on
2N
System Configuration 4
4-1