Table of Contents
Advertisement
FX2N-64CL-M CC-Link/LT Master Block
Bit
Turns ON when the DIP switch setting is
b8
changed during operation.
b9 to b14
Turns ON when abnormality is detected in
the self-loop-back test. (When the FX
b15
64CL-M is connected to the FX
PLC, check for hardware errors in the status
indicator LEDs.)
Description
--
2N
Series
1N
Countermeasures
• Return the DIP switch setting to the status
at the time of power ON.
• If the DIP switch setting should be
changed, change the DIP switch setting,
reset power.
-
• Refer to "12.4 Self-loop-back test".
Troubleshooting 12
--
12-6
Advertisement
Table of Contents
