12Model Code [Bfm #30 (1Eh)]; 13Detailed Remote Station Information [Bfm #32 (20H) To #95 (5Fh)] - Mitsubishi Electric MELSEC FX2N-64CL-M User Manual

FX2N-64CL-M CC-Link/LT Master Block Model
10.2.12 Model code [BFM #30 (1Eh)]
The model code (K7120) of the FX
10.2.13 Detailed remote station information [BFM #32 (20h) to #95 (5Fh)]
The information (I/O type, number of points) on remote stations is stored here.
In the CONFIG mode, the contents of these buffers can be changed.
(For the details of content changes, refer to "8.4 Specification of reserved station" and "8.5
Editing the detailed remote station information".)
Buffer memory assignment
Buffer memory No.
BFM #32 (20h)
BFM #33 (21h)
BFM #95 (5Fh)
Configuration of detailed remote station information
Bit
b0
b1
b2
b3
b4
b5 to b7
b8
b9
b10
b11
b12
b13
b14
b15
Details of each item of detailed remote station information
1) Number of I/O points
The number of I/O points used in each station No. assigned to each buffer memory is stored
here.
The maximum number of points is 4 or 16 according to the number of points per station set
by the DIP switch.
For example, when a remote I/O unit having 16 I/O points is used in the 4-point mode, the
number of points per buffer memory is 4, and the I/O points of the remote I/O station are
assigned to four buffer memories.
In the case of composite I/O type remote unit, the larger amount between the number of
input points and the number of output points is stored.
Remote station information area for the station No.1
Remote station information area for the station No.2
Remote station information area for the station No.64
Function
Number of I/O points
(Setting prohibited)
Input flag
Output flag
(Setting prohibited)
Head station flag
Input filter setting
Output hold/clear setting
(Setting prohibited)
Reserved station flag
-64CL-M is stored here.
2N
Description
1(ON)
00001:1point
01101:13points
01010:10points
00111:7points
00100:4points
10000:16points
The bits above are in the order "b4, b3, b2, b1, b0".
Input is given.
Output is given.
This is the head station.
High-speed input
HOLD
This is specified as reserved
station.
Assignment of Buffer Memory 10
0(OFF)
00101:5points 01001: 9points
00010:2points 00110:6points
01110:14points 00011:3points
01011:11points 01111:15points
01000:8points 01100:12points
Set these bits to 0.
Input is not given.
Output is not given.
Set these bits to 0.
This is not the head station.
General-purpose input
CLEAR
Set these bits to 0.
This is not specified as
reserved station.
10-10