Connection Of Cables, Connectors And Terminating Resistors - Mitsubishi Electric MELSEC FX2N-64CL-M User Manual

FX2N-64CL-M CC-Link/LT Master Block
6.

Connection of Cables, Connectors and Terminating Resistors

Connect the master station, power adapter and remote stations with flat cables dedicated to
CC-Link/LT and connectors for dedicated flat cables.
Lay out the master block on one side of the trunk line.
WIRING PRECAUTIONS
• Shut down all power supplies before starting installation or wiring work.
If the power is not disconnected from all sources an electric shock or serious product
damage may occur.
WIRING PRECAUTIONS
• Correctly wire the master block while confirming the rated voltage and terminal
arrangement of the FX
If a power supply different from the rated supply is connected or wiring is performed
incorrectly, fire or failure may be caused.
• Correctly wire the master block while confirming the rated voltage and terminal
arrangement of the FX
If a power supply different from the rated supply is connected or wiring is performed
incorrectly, fire or failure may occur.
• Pay attention to foreign objects such as cuttings or wiring chips do not enter the
FX -64CL-M, otherwise, fire, product failure or malfunction may occur.
2N
Connection of Cables, Connectors and Terminating Resistors 6
-64CL-M.
2N
-64CL-M.
2N
6-1