Specifications - Mitsubishi Electric MELSEC FX2N-64CL-M User Manual

FX2N-64CL-M CC-Link/LT Master Block
2.

Specifications

This section explains the specifications of the FX
DESIGN PRECAUTIONS
When a remote I/O unit fails, outputs may randomly set ON or OFF, therefore, build an
external monitoring circuit that will monitor any input signals that could cause a serious
accident.
DESIGN PRECAUTIONS
• Do not bind control and flat cables dedicated to CC-Link/LT together with power cables.
Keep control and flat cables dedicated to CC-Link/LT away from major circuits and power
cables by 100 mm (3.93") or more.
It may cause a malfunction due to noise interference.
• Use the FX
Link/LT interface and flat cables dedicated to CC-Link/LT.
If any force is applied, wire breakage and failure may be caused.
STARTING AND MAINTENANCE PRECAUTIONS
• Do not touch the terminals while the power is ON. It may cause an electric shock or
malfunction.
• Shut down all phases of the power supply outside the master block before starting any
cleaning procedures.
If the power is not disconnected from all sources, the FX
malfunction.
STARTING AND MAINTENANCE PRECAUTIONS
• Do not disassemble or modify the FX
Doing so may cause failure, malfunction, injury, or fire.
• The case of the FX
Do not drop or apply strong impacts to the FX
DISPOSAL PRECAUTIONS
• Treat the FX
-64CL-M in such status that any force is not applied on connectors for CC-
2N
-64CL-M is made of resin.
2N
-64CL-M as industrial waste when disposing of the product.
2N
-64CL-M.
2N
-64CL-M.
2N
-64CL-M.
2N
Specifications 2
-64CL-M may fail or
2N
2-1