Mitsubishi Electric MELSEC FX2N-64CL-M User Manual page 58

FX2N-64CL-M CC-Link/LT Master Block
WIRING PRECAUTIONS
• Make sure to shut down all power supplies before starting the installation or wiring work.
If the power is not disconnected from all sources an electric shock or serious product
damage may occur.
WIRING PRECAUTIONS
• Correctly wire the master block while confirming the rated voltage and terminal
arrangement of the FX
If a power supply different from the rating is connected or wiring is performed incorrectly,
fire or failure may be caused.
• Correctly wire the master block while confirming the rated voltage and terminal
arrangement of the FX
If a power supply different from the rating is connected or wiring is performed incorrectly,
fire or failure may be caused.
• Pay attention that foreign objects such as cuttings or wiring chips do not enter the FX
64CL-M.
It may cause fire, product failure or malfunction.
STARTING AND MAINTENANCE PRECAUTIONS
• Do not touch the terminals when the power is ON. It may cause an electric shock or
malfunction.
STARTING AND MAINTENANCE PRECAUTIONS
• Do not disassemble or modify the FX
malfunction, injury, or fire.
• The case of the FX
the FX
2N
-64CL-M.
2N
-64CL-M.
2N
-64CL-M is made of resin. Do not drop or apply strong impacts to
2N
-64CL-M.
-64CL-M. Doing so may cause failure,
2N
Program Example 11
-
2N
11-2