Table of Contents
Advertisement
Planning the installation
Inverter installation location
Installation clearances and air circulation
► Ensure sufficient air circulation. Warm air must be
able to escape from below. Leave enough space
around the inverter.
► Note the Operating temperature range without derat-
ing and the Operating temperature range.
When the Operating temperature range without derat-
ing is exceeded the inverter reduces the AC power
fed into the mains.
When the Operating temperature range is exceeded,
the inverter stops feeding AC power into the mains.
This is normal operating behavior for the inverter and
is necessary to protect the internal electronics.
>20 cm
Mounting alignment
► Mount the inverter vertically.
Installation location of the inverter
► Attach the inverter so that the information on the
display can be read and the buttons can be operated
without any problems.
► The inverter is heavy. The wall has to be able to bear
the heavy weight of the inverter.
► Always use the mounting plate supplied with the
inverter.
16
► Use mounting materials (dowels, screws etc.) that are
► Mount the inverter on a vibration-free wall to avoid
► When using the inverter in residential areas or in
► Mount the inverter on a fireproof wall.
>20 cm
Outdoor installations
► Indoor installation is generally preferable. The inverter
suitable for the wall or the mounting system, as well
as the heavy weight of the inverter.
disruptions.
buildings with animals, possible noise emissions can
be disturbing. Therefore, carefully choose the place of
installation.
has a protection rating of IP65 and can therefore
be outdoors as well. When installed outdoors, the
inverter should nevertheless be protected by a roof
against direct solar irradiation, rain and snow, in order
to ensure sufficient air circulation.
Installation Instructions for the Hybrid E5 Battery Storage System EU V1 EN 2018-09-17
Advertisement
Table of Contents
