Installation Instructions for the Hybrid E5 Battery Storage System EU V1 EN 2018-09-17
Connecting inverter to battery box
Readying charging cables for use and connecting them
1. Push the red charging cable into the BT+ connection
and the black charging cable into the BT– am con-
nection on the inverter.
NOTICE
Ingress of moisture .
Moisture can penetrate through unused con-
nection openings.
► Always seal any unused connection open-
2. Push the red charging cable into the Battery+ con-
nection and the black charging cable into the Bat-
tery– connection on the left side of the battery box.
ings with the closure caps specified by the
manufacturer of the plug connector.
37