Table of Contents
Advertisement
Connecting RS485 and voltage supply
1
2
Connecting to router (optional)
Installation Instructions for the Hybrid E5 Battery Storage System EU V1 EN 2018-09-17
Connecting inverter and Smart Monitor via RS485
1. Break out the cable insertion tab on the underside of
2. Connect and insert the RS485 cable coming from
3. Plug the network cable coming from the router into
the Power Monitor.
the inverter to the RS485 plug.
1 12V voltage supply for inverter (VCC and Gnd
terminals)
2 dAtA+ and dAtA– for the inverter
the LAN connection.
43
Advertisement
Table of Contents
