Installation Instructions for the Hybrid E5 Battery Storage System EU V1 EN 2018-09-17
Connecting the communication card of the inverter
1. Unscrew the cable gland of the communication con-
2. Unscrew and carefully pull out the cover. The com-
3. Remove the same number of rubber plugs from the
4. Pull all required cables through the cable gland and
Connecting the communications cable
nection and remove the cable gland and seal.
munications card is screwed onto the cover.
seal corresponding to the number of cables to be
connected.
Do not remove the rubber plugs from the unused
seal feed-throughs.
seal.
Retain the rubber caps removed in this process.
41