Connecting inverter and power meter via RS485
Connecting the RS485 cable to P1E
P1E
Connecting the RS485 cable to P3E
P3E
44
1
2
1
2
1. Connect and insert the RS485 cable coming from
the inverter to the RS485 plug.
1 Connect DATA+ to Terminal 1 (485 A (+)) and
DATA– to Terminal 2 (485 b (–)).
2 Short circuit Terminals 1 and 2 to activate the
RS485 termination resistor.
2. Connect and insert the RS485 cable coming from
the inverter to the RS485 plug.
1 Short circuit Terminals 1 and 2 to activate the
RS485 termination resistor.
2 Connect DATA– to Terminal 5 (485 b (-)) and
DATA+ to Terminal 6 (485 b (+)).
Installation Instructions for the Hybrid E5 Battery Storage System EU V1 EN 2018-09-17