Tdm Properties And Statistics - Redline AN-30 System User Manual

tdm get ethsmfrok, no params
Returns: frames received ok
tdm get ethsbrok, no params
Returns: bytes received ok
tdm get ethsaerr, no params
Returns: align errors
tdm get ethscerr, no params
Returns: crc errors
tdm get ethsfrok, no params
Returns: frames transmitted ok
tdm get ethsbtok, no params
Returns: bytes transmitted ok
tdm get ethsscol, no params
Returns: single collisions
tdm ethsmcol, no params
Returns: multiple collisions
tdm get ethstdef, no params
Returns: transmission deffered
tdm get ethslcol, no params
Returns: late collisions
9.11.2.
All commands return non-ack if the parameter SN is not valid (>4). A value of SN>4 is
invalid.
tdm get tdmslos, params: SN
Returns: loss of signal
tdm get tdmslfa, params: SN
Returns: loss of framing alignment
tdm get tdmslomf, params: SN
Returns: loss of multi framing
tdm get tdmsrai, params: SN
Redline Communications

TDM properties and statistics

Page 60 of 80
AN-30 System User Manual
.....solving the first mile challenge