Redline AN-30 System User Manual page 56

Show operations
The show commands are:
- tdm showbundle
tdm SHOW_BUNDLE, params: BN, CFG,
This command is used to retrieve the bundle parameters for the specified BN from
either the running or startup config.
The default configuration selected is running config.
CFG
0
1
Other commands
Other commands are:
- tdm delbundle
tdm delbundle, params: BN
This command is used to delete the settings of bundle number BN.
9.9.
Redline Communications
running config
startup config
Page 56 of 80
AN-30 System User Manual
Definition
.....solving the first mile challenge